桂林-阳朔地区DEM地形特征与岩性相关性分析及分类研究

地形地貌是岩性解译的重要信息,地形因子作为描述DEM数字曲面几何特征的定量指标参数,可用来定量化表达不同岩性所在地区地形地貌特征。本文以桂林-阳朔地区为研究区,研究地形因子数学、地质意义,建立岩性与地形因子组合间的定量关联,进而实现岩石类型划分。本文基于ASTERGDEM提取坡度、起伏度等12个地形因子,在分析各个地形因子地质意义基础上,通过聚类分析及方差分析的多元统计分析方法,研究各岩性地形因子特性及其关联性,建立研究区岩性之间的定量差异;此外,利用因子分析方法研究岩性分类过程中的主导因素,确定适宜岩性分类方法以实现定量化岩性分类。实验结果表明：不同岩性、不同地形地貌的地形因子（组合）之间具有显著差异,基于因子分析得到的宏观地形复杂度指数（MTI）以及微观曲率指数（MCI）对岩石类型的分类精度达77.36%。研究表明,地形复杂度等地形因子可用于岩性分类,采用因子分析方法可获取反映地形地貌宏观、微观特征的定量指标,且岩性分类效果良好。     

不同盐度对文蛤(Meretrix meretrix)呼吸代谢及体内酶活性的影响

为研究不同盐度对文蛤呼吸代谢的影响,本实验设置5个盐度(‰)梯度(11、18、25、32、39),检测不同盐度对文蛤(Meretrixmeretrix)耗氧和排氨的影响,以及文蛤的外套膜、鳃、肝胰腺三种组织中乳酸脱氢酶和Na+/K+-ATP酶活性的变化。结果表明:随着盐度的不断升高,文蛤耗氧率先升后降再升,在盐度18时达到最大值;排氨率先升后降,在盐度32时达到最大值。随着盐度不断升高和胁迫时间延长,文蛤的肝胰腺中乳酸脱氢酶活力总体呈先升高后下降再升高的趋势(P0.05),酶活力在盐度39时为最高;随着盐度不断升高和胁迫时间延长,文蛤的外套膜中Na+/K+-ATP酶活力总体呈先下降再升高后下降的趋势(P0.05),在盐度32时为最高;文蛤的外套膜和鳃中乳酸脱氢酶活力以及鳃和肝胰腺中Na+/K+-ATP酶活力受盐度影响不显著(P0.05),酶活力变化也多呈现"W"形的变化趋势。研究结果为文蛤的人工养殖提供参考。     

复杂地形景区三维导览图的设计与实现

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。     

连续台风时期香港区域的水汽变化分析

利用香港卫星定位参考站网GNSS观测数据,提取强热带风暴"塔拉斯"与热带风暴"洛克"影响期间各测站天顶方向对流层延迟,反演香港区域大气可降水量;根据香港区域49个天文台气象站提供的实测降雨量数据,分析大气可降水量与实际降雨量的相关性,以及两次台风对香港区域水汽时空分布的不同影响。结果表明,大气可降水量在台风影响前期均上升,在大量降雨后回落,但在连续台风的间歇期间,仍高于台风来临前的水平;水汽累积是大量降雨的前提条件,当水汽累积量相近时,水汽累积时长与累积降雨量呈正相关;台风期间大气可降水量值超过65 mm的区域面积与台风等级相关,台风路径对局部水汽分布有一定的影响。     

弧形海岸裂流的数值模拟研究

弧形海岸波浪产生的裂流严重危害人类活动，但是目前对其特征缺乏充分认识。本文对Haller物理模型实验和三亚大东海的数值模拟表明FUNWAVE模式具有较好的裂流模拟能力。基于该模式进行了多种弧形海岸条件的裂流数值模拟，给出裂流的一些特征：（1）海岸弯曲度增大，裂流增强；（2）海岸坡度对裂流有比较大的影响，太陡或太平缓的海岸不利于形成裂流；（3）海岸尺寸减小，裂流减弱；（4）波高和波周期增大，裂流增强，但是对于某些海岸而言，0.4m波高可能就存在危害比较大的裂流。     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

Wetland hydroperiod classification in the western prairies using multitemporal synthetic aperture radar

Wetlands represent one of the world's most biodiverse and threatened ecosystem types and were diminished globally by about two‐thirds in the 20th century. There is continuing decline in wetland quantity and function due to infilling and other human activities. In addition, with climate change, warmer temperatures and changes in precipitation and evapotranspiration are reducing wetland surface and groundwater supplies, further altering wetland hydrology and vegetation. There is a need to automate inventory and monitoring of wetlands, and as a study system, we investigated the Shepard Slough wetlands complex, which includes numerous wetlands in urban, suburban, and agricultural zones in the prairie pothole region of southern Alberta, Canada. Here, wetlands are generally confined to depressions in the undulating terrain, challenging wetlands inventory and monitoring. This study applied threshold and frequency analysis routines for high‐resolution, single‐polarization (HH) RADARSAT‐2, synthetic aperture radar mapping. This enabled a growing season surface water extent hyroperiod‐based wetland classification, which can support water and wetland resource monitoring. This 3‐year study demonstrated synthetic aperture radar‐derived multitemporal open‐water masks provided an effective index of wetland permanence class, with overall accuracies of 89% to 95% compared with optical validation data, and RMSE between 0.2 and 0.7 m between model and field validation data. This allowed for characterizing the distribution and dynamics of 4 marsh wetlands hydroperiod classes, temporary, seasonal, semipermanent, and permanent, and mapping of the sequential vegetation bands that included emergent, obligate wetland, facultative wetland, and upland plant communities. Hydroperiod variation and surface water extent were found to be influenced by short‐term rainfall events in both wet and dry years. Seasonal hydroperiods in wetlands were particularly variable if there was a decrease in the temporary or semipermanent hydroperiod classes. In years with extreme rain events, the temporary wetlands especially increased relative to longer lasting wetlands (84% in 2015 with significant rainfall events, compared with 42% otherwise).     

圆形数值波浪水池斜向和多向入射波浪模拟研究

为了研究斜向入射波浪,基于三维不可压缩两相流模型,开发了一套圆形数值波浪水池数值模型。在圆形波浪水池中,通过源项造波法成功生成了任意入射方向的波浪,并且利用人工摩擦项模拟阻尼区以数值耗散反射波浪。模型基于嵌入式多块网格体系,采用FVM法(finite volume method)离散Navier-Stokes方程,VOF法(volume of fluid)追踪自由水面。试验结果表明,斜向入射波浪的模拟结果与理论值基本一致,圆形波浪水池在模拟斜向入射波浪时,有效区域的面积较传统波浪水池显著增大,而且有效区域受波浪入射角度的影响也较小。同时,通过叠加多列斜向入射波浪,模拟出了多向交叉波列,并通过与理论结果对比,发现其具有较高的精度。